www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
Always use the system’s Air Assist feature when vector cutting.
3.6 Water Cooling System – Requirements
To guarantee do not lead to the glass laser tube break once it reach a certain temperature
during the engraving and the cutting. The device must be running and connecting with the
laser to make sure the laser tube is safe during the work.
Do not run the machine without an adequate water cooling system.
To Next Page
Loading...
