www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
7. Generate a graphic with the help of the graphics software. The graphics size must be
adjusted until less than the dimensions of the work piece.
8. Select “Output”, and then input the diameter of the object and the circle pulse. How to
set up the parameter for “enable rotate engrave”, please click below link for the
instruction
https://www.thunderlaser.com/uncategorized/rotary-axis-attachment-has-a-wrong-cylindrical-en
graving-cutting-size.html
9. Select "Download", click “Origin” and “Frame” on the LCD display, please make sure
that the material is in the right location and enough space for working.
10. Finally press the “Start-Pause” button in the LCD display, to start the engraving or
cutting process.
Also you can refer to the video of how the rotary axis works in our website：
https://www.thunderlaser.com/how-to-use-your-laser-machine/how-the-rotary-axis-works.html
To Next Page
Loading...
