THUNDER LASER NOVA-
35
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT
CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province,
China
required during repair and service, the replacement of the safety
components must be performed immediately after completion of the
service and repair activities.
7. Preparation, retooling, change of work piece, maintenance and repair
activities must only performed with equipment switched off, by trained
personnel.
8. It is forbidden to perform unauthorized modifications and changes to
the machine. It is emphasized, that any unauthorized modifications to
the machine are not permitted for safety reasons.
2.2 Laser Safety Information
1. To assess the potential dangers laser systems pose, they are
classified into 2 safety classes, thunder laser NOVA-35 is a device of
class 2. This is guaranteed by the protective housing and the safety
installations.
Please note that improper and warranty operation of the device can
override the status of Safety class 2 and can cause the emission of
harmful radiation.
2. This laser engraving system contains a carbon dioxide (CO2) laser
of class 2 that emits intensive and invisible laser radiation. Without
safety precautions the direct radiation or even diffuse reflected
radiation is dangerous!
3. Without safety precautions, the following risks exist with exposure to
laser radiation:
Eyes: Burns to the cornea
Skin: Burns
Clothing: Danger of fire
4. Never try to modify or disassemble the laser and do not try to start
up a system that had been modified or disassembled!
5. Dangerous radiation exposure can result from the use of operation
or adjustment equipment other than that described here, and if different
operational methods are performed.
To Next Page
Loading...
