THUNDER LASER NOVA-
35
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT
CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province,
China
4.11 The First Time Running the Laser
To be safe, never ever run the laser system unattended.
According to international standard，“ O”means close；“ I”means
open for the rocker switch below
Yours first engraving tests
The following steps describe how to successfully engrave a first pattern. Please follow
the individual steps:
1. First switch on the water chiller.
2. Switch on you Laser and wait for a beep to note the machine is initialized, and the
laser head will do the reset and find the home from top left corner.DO NOT click “ESC”
button to stop the system initialization.
When turn on the power of machine, and note that turn on the Main
switch first and then the Laser switch.
To Next Page
Loading...
