Thunder Laser NOVA- 35 - Z;U Button Operations

THUNDER LASER NOVA-
35
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT
CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province,
China
46
02 200 29.1
03 100 31.5
01 400 25.1
MaxPower1：
%
Modified press Enter
30.0
MaxPower2：
Press Z/U move item
%
30.0
Layer0：
MinPower1：
%
22.0
MinPower2：
%
30.0
Speed：
mm/s
400
4.4.6 Z/U button
The Z/U button can be pressed when the system is idle or the work is finished. On pressing
this button, it will show some entries in the following interface:
 Z Move: When the green block is on “Z Move” item, to move the Z-axis table up
and down by pressing left and right arrow button.