Thunder Laser NOVA- 35 - Page 48

THUNDER LASER NOVA-
35
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT
CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province,
China
48
 Other: the other operation of the memory files;
 Run: To run the selected file;
 Track: To track the selected file, and the track mode is optional;
 Work time: To forecast the running time of the selected file, and the time is
accurate to 1ms;
 Clear count: To clear the running times of the selected file;
 Delete: To delete the selected file in the memory;
 Copy to Udisk: To copy the selected file to Udisk;
If the “Other” entry is pressed, the system will show as below:
10
Total：
delete all file
Clear all count
Current work time
Clear
Format drastically
Format speedly
 Current work time: To forecast the running time of the current file(the current
file No. is showed on the main interface), and the time is accurate to 1ms.
 Clear all count: To clear the running times of every file in the memory
 Delete all file: To delete all memory files
 Format speedily: To format memory speedily, and then all the files in memory
will be deleted.
 Format drastically: To format memory drastically, and then all the files in
memory will be deleted.
Total: the total running times of all the files.
2). U-Disk File
If the “U-disk+” entry is pressed, you can copy your file from USB flash drive to your
machine.