20
•
•
Throttle at High Position
Throttle at Low Position
High End Blade Pitch Setting
Low End Blade Pitch Setting
Linkage Position for beginner
11û
-2û
Move the throttle/collective stick to the low stick position. Use the ATV function of your transmitter
to make the "pointer" line up with the -2û mark for beginners (with the -5û mark for intermediates,
and -10û mark for experts).
Move the throttle/collective stick to the full throttle position (see upper right diagram). The molded "pointer"
should now line up with the upper limit mark, which should provide about 11û of blade pitch.
11û
6û
-2û
-5û
-10û
To Next Page
Loading...
