11û
-5û
21
Collective Travel for F3C and 3D Flying
•
•
The molded "pointer" should line up with the upper limit mark, which
should provide about 11û of blade pitch.
Throttle at High Position
Throttle at Low Position
High End Blade Pitch Setting
Low End Blade Pitch Setting
Linkage Position for F3C or 3D
Position for F3C or 3D
11û
For intermediates set the low end to -5û.Foradvanced F3C and 3D flying,
set the low end to -10û.
-5û
-10û
To achieve +11û to -10û of collective travel range, the steel linkage ball must be moved to the inner
location as shown in the figure.
Use the ATV function of the transmitter to get the necessary servo travel.
To Next Page
Loading...
