31
man_vd6s2-de-130515
Proper Use
The VD6 serves exclusively to display and control absolute pressure in combina-
tion with Thyracont vacuum transducers. It may only be connected to compo-
nents specifically provided for such purpose.
Improper Use
The use for purposes not covered above is regarded as improper, in particular:
- the connection to components not allowed for in their operating instructions
- the connection to components containing touchable, voltage carrying parts.
No liability or warranty will be accepted for claims arising from improper use.
The user bears the responsibility with respect to the used process media.
3 Installation
3.1 Notes for Installation
Unauthorized modifications or conversions of the instrument are
not allowed! Before connecting to mains power: make sure that the
supply voltage stated on the type label complies with your local
mains voltage.
Installation location: Indoor
For not fully air conditioned open buildings and operation rooms:
Temperature: +0°C ... +40°C
Rel. Humidity: 5 - 85%, not condensing
Air pressure: 860 - 1060 hPa
To Next Page
Loading...
