Tidel TACC - Opening and Securing Vaults

12
Opening A Vault
Step 1: Navigate to the “Open Vault” Menu.
Log In > (enter code) > Open Vault
Step 2: Select the desired vault to open (Main Vault or Bill Acceptor
Vault).
Step 3: The Display will show “The vault will open in XX minutes”.
Step 4: After the door opening delay time has expired, the top line
of the Display will indicate “Vault Wait Complete”.
Step 5: Navigate to the “Open Vault” Menu.
Log In > (enter code) > Open Vault
Step 6: Select the desired vault to open (Main Vault or Bill Acceptor
Vault).
Step 7: Turn the handle to open the Vault.
Step 8: Select “Go Back” until the Main Screen is displayed.
Securing All Vaults
! Performing a “Secure All Vaults” will stop all door opening
procedures that are in progress.
Step 1: Navigate to the “Open Vault” Menu.
Log In > (enter code) > Open Vault
Step 2: Select “Secure All Vaults”.
Step 3: The Display will show “All vaults have been secured”.
Step 4: Press “Done” to return to Manager Screen 1.