14
Clearing Bill Acceptor Totals
(TACC-V only)
Step 1: Navigate to the “Cash Control” Menu.
Log In > (enter code) > Cash Control > Clear Acceptor
Step 2: The prompt “Are you sure the bill acceptor was emptied?”:
NO - Amounts shown in the bill acceptor will not be
cleared.
YES - Amounts shown in the bill acceptor will be cleared.
Step 3: Select “Go Back” to exit the “Cash Control ” menu.
Dumping Tubes
The Main Vault must be open to perform this function.
Step 1: Navigate to the “Open Vault ” Menu.
Log In > (enter code) > Open Vault > Main Vault
Step 2: The Display will show “The vault will open in XX minutes”.
Step 3: After the door opening delay time has expired, the top line
of the Display will indicate “Vault Wait Complete”.
Step 4: Navigate to the “Open Vault” Menu.
Log In > (enter code) > Open Vault > Main Vault
Step 5: Turn the handle to open the Vault. Manager Screen 1 will
be displayed.
Step 6: From Manager Screen 1, select “Dump Tubes”.
Step 7: Select the column you wish to dump tubes from.
NOTE: To stop the dumping process and return to the column selec-
tion screen, select “Cancel”.
To return to the Manager Screen 1, select “Go Back”.
To Next Page
Loading...
