Tidel TACC - Paper Specifications

29
Selections do not appear in the Vend Tube Menu:
1) Tube count may equal 0. Add tubes to the column.
2) Amount assigned to column may be over the User’s vend limit.
3) Unplug the TACC-V from the wall socket (or remove the fuse),
wait 5 seconds, then re-apply AC power.“
The Main/Acceptor vault has been open too long, please close it
1) This error message is displayed when the unit detects a door
has been unlocked for more than 5 minutes.
2) Close and lock the appropriate door.
3) Select “Cancel”. A prompt to enter the Manager code will be
displayed. Entering the Manager code will temporarily return
to the Main screen. The error message will return after 5
minutes if the door remains unlocked.
NOTE: After the Manager Code entry has been used to bypass the
error message 3 times, the error will not return.
Troubleshooting
(continued)
Paper Specifications
Integrated (built-in) Printers:
Thermal paper
Paper width - 79.5 mm (3.13 inches)
Roll diameter - 80 mm or less (3.15 inches)
Thickness - 65 micron (0.065 mm)
Epson/Omni Printers:
Thermal paper
Paper width - 79.5 mm (3.13 inches)
Roll diameter - 80 mm or less (3.15 inches)
Thickness - 65 micron (0.065 mm)