Tidel TACC - DataKey Programming

DataKey Programming
Each TACC-V is shipped with (1) “DataKey” that can be programmed
for various functions.
! Armored Car/Courier Access.
! Emergency Key (allows access to the Main Vault in
case of a Touchscreen failure).
To Program the DataKey as a Courier Key:
Step 1: Navigate to the “Courier Accounts” menu.
Log In > (enter Executive code) > More > Accounts > Cou-
rier Accounts > Add > Key Not Trained
Step 2: At the prompt, insert and turn the Datakey.
Step 3: Press “Go Back” to exit the menu.
To Program the DataKey as an Emergency Key:
Step 1: Navigate to the “Door Control Policy” menu.
Log In > (enter Executive code) > More > Policy > Door
Control > No Emergency Key
Step 2: At the prompt, insert and turn the Datakey.
Step 3: Press “Go Back” to exit the menu.
26