What to do if my Tiger River Sumatran Hot Tub has organic buildup or scum ring?
If you notice an organic buildup or scum ring around your Tiger River Hot Tub, wipe off the scum with a clean rag. If the buildup is severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and then refill the spa.
What to do if my Tiger River Sumatran Hot Tub has eye irritation?
If you experience eye irritation while using your Tiger River Hot Tub: * **Adjust pH** if it is low. * **Shock spa with sanitizer and maintain sanitizer level** if the sanitizer level is low.
What to do if my Tiger River Sumatran Hot Tub has skin irritation or rash?
If you experience skin irritation or a rash after using your Tiger River Hot Tub: * **Shock spa with sanitizer and maintain sanitizer level** if the water is unsanitary. * **Allow free chlorine level to drop below 5 ppm before spa use** if the free chlorine level is above 5 ppm.
What to do if my Tiger River Hot Tub has stains?
If your Tiger River Hot Tub has stains: * **Adjust total alkalinity and/or pH** if they are too low. * **Use a metal deposit inhibitor** if there is high iron or copper in the source water.
What to do if my Tiger River Sumatran Hot Tub has scale?
If your Tiger River Hot Tub has scale, it may be due to high calcium content in the water, and total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale removal is required, drain the spa, scrub off the scale, refill the spa, and balance the water.
What does it mean if the ready indicator is blinking on my Tiger River Hot Tub?
If the ready indicator is blinking on your Tiger River Hot Tub, disconnect power for at least thirty seconds. If blinking continues, call for service, because it could be a temperature sensor problem.
Essential safety guidelines for spa operation and use.
Key operational advice and recommendations for optimal spa experience.
Guidelines to prevent unauthorized access and ensure child safety around the spa.
Critical instructions to prevent electrical shock hazards during spa use and installation.
Information on preventing dangerous body overheating in hot water environments.
Precautions to avoid injury from high water temperatures and hot surfaces.
Essential checks and considerations before choosing a location for your spa.
Guidelines for installing your spa in outdoor or patio settings.
Requirements and considerations for installing a spa on a deck.
Specific instructions and precautions for indoor or basement spa installations.
Step-by-step guide to ensure your spa is perfectly level for proper operation.
Identification of overhead views and equipment compartment for Caspian model.
Identification of overhead views and equipment compartment for Bengal M/MM models.
Identification of overhead views and equipment compartment for Sumatran model.
Electrical setup for 230V models including Caspian and Bengal MM.
Detailed wiring diagram and instructions for the Caspian 230V model.
Detailed wiring diagram and instructions for the Bengal MM 230V model.
Information on converting Bengal M and Sumatran models between 115V and 230V.
Wiring instructions for 230V converted Bengal M and Sumatran models.
Guidelines for operating the spa on a 115V circuit.
Step-by-step guide for initial spa filling and startup after refills.
Explanation of how to control spa jet systems using the SmartJet lever.
How to adjust the air and water mixture for Precision jets.
Instructions for testing and operating the 115V GFCI protection.
Operation of the water feature on specific spa models.
Details on Jet System 1 and 2 for the Caspian model.
Explanation of control panel buttons, display icons, and indicator lights.
Overview of the main control panel menus: Temp, System, Tools.
How to use Temperature Lock and Spa Lock to secure the control panel.
Instructions for controlling the optional spa music system.
Procedures for safely draining the spa water.
Steps to prevent spa damage from freezing temperatures.
Instructions for preparing the spa for extended periods of cold weather.
Information on the spa's filter system and maintenance.
Details about the secondary suction screen and its importance.
How to clean, maintain, and replace spa pillows.
Guidelines for cleaning and maintaining the spa shell and cabinet.
Instructions for cleaning, conditioning, and maintaining the spa cover.
Procedures for maintaining spa water quality during short or long absences.
Overview of water maintenance areas: filtration, chemical balance, sanitation.
How to test and adjust the spa water's Total Alkalinity for proper pH buffering.
How to test and adjust the spa water's Calcium Hardness for equipment protection.
How to test and adjust the spa water's pH level for optimal conditions.
Overview of the EverFresh water care system components and usage.
Instructions for replacing the silver ion purifier cartridge.
Information on using sodium dichlor as a spa sanitizer.
Understanding and managing foam in spa water.
Information about the FreshWater III high-output ozone system.
Answers to frequently asked questions about spa water chemistry.
Definitions of common terms used in spa water quality and maintenance.
Troubleshooting tips for GFCI trips and high limit thermostat issues.
Important notes on jet pump thermal cutoffs and component sensors.
A log for recording spa maintenance activities and service dates.
Solutions for common spa operation problems like no power or inactive jets.
Solutions for common spa water issues like cloudy water, odor, or algae.
General| Brand | Tiger River |
|---|---|
| Model | Sumatran |
| Category | Hot Tub |
| Language | English |
To Next Page
