7
-Tilgin HG320 Series Quick Guide
4.6. Connecting phones / equipment
You can connect your analogue phones/equipment to the home gateway.
The devices connected to the gateway are adapted for VoIP calls.
Mind that you might need a country specific phone plug and a special phone
cable (both supplied by your operator) to connect multiple analogue devices.
If your services do not include telephony, contact your operator.
Connecting a single analogue phone/equipment
Connect the device(s) to port #1 (and/or #2 (HG322)).
Connecting multiple analogue phones/equipment
All of the phones in your household can be connected to the home gateway
using a country specific phone plug and a special phone cable.
Each port can handle up to five devices in cascade. In this case, DO NOT
connect any of the home gateway phone ports to the phone socket on the wall.
Plug the special cable into the phone port (#1) and then into the specific phone
plug connected on the main phone socket on the wall.
DO NOT use an ordinary phone cable for this purpose. It requires a special
phone cable which can be different from country to country.
This option must be supported in your country and by your operator.
To Next Page
Loading...
