TW 13/75G
3 / 32
PARTS LOCATOR
C190-0187 25.01.2019 Rev: 1.0
THE TW13/75G HAS THE FOLLOWING FIXED GUARDS FOR PROTECTION OF THE OPERATOR, CHIPPER
AND ENVIRONMENT:
Funnel: Protects the user from injuries from moving parts and ejected material during operation. •
Exhaust Guard: Protects exhaust from damage. Protects the user from heat injuries. •
Top Rotor Housing Guard: Protects user from rotational parts e.g. cutting blades. The interlocking switch disengages •
the engine when the hatch is opened to stop the chipper running.
Safety Switch Guard: Prevents user overriding the interlocking switch. •
Belt Guard: Protects the user from rotational parts e.g. belts and pulleys, hot surfaces and engine fluids. Protects •
machine from ingress of environmental debris.
Guards may be removed for maintenance only, as described in the Service Instruction pages of this manual. Ensure guards
remain in place throughout operation.
GRIP
FUNNEL
DISCHARGE BUCKET
TOP ROTOR HOUSING
GUARD
BELT GUARD
ENGINE
PETROL TANK
AIR FILTER COVER
DISCHARGE HANDLE
OPENING HANDLE
ROTOR HOUSING CATCH BOLT
SAFETY SWITCH
MANUAL CANNISTER
LIFTING EYE
EXHAUSTGUARD
To Next Page
Loading...
