Timberwolf TW 13/75G - Noise Test

TW 13/75G
6 / 32
SAFE WORKING
C190-0187 25.01.2019 Rev: 1.0
GENERAL SAFETY MATTERS
Do not operate chipper unless available light is sufficient •
to see clearly.
Do not use or attempt to start the chipper without the •
feed funnel and guards securely in place.
Do not stand directly in front of the feed funnel when •
using the chipper. Stand to one side.
Do not smoke when refuelling. •
Do not let anyone who has not received •
instruction operate the machine.
Do not climb on the machine at any time. •
Do not handle material that is partially •
engaged in the machine.
Do not touch any exposed wiring while the machine is •
running.
Do not use the chipper inside buildings.•
Noise levels above 80dB (A) will be
experienced at the working position.
Prolonged exposure to loud noise may
cause permanent hearing loss. All
persons within a 4 metre radius must
also wear good quality ear protection
(EN 352) at all times to prevent possible
damage to hearing.
Guaranteed Sound
Power: 120dB (A)
As required by Annex III of Directive
2000/14/EC “Noise Emission in the
environment by equipment for use
outdoors”. Tested according to BS EN
ISO 3744:2010.
NOISE TEST
Machine: TW 13/75G
Notes: Tested chipping 40mm x 40mm corsican pine 1.5m in length
DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
DAMAGE IS
LIKELY
BRICKS STRING ROOTS BEDDING
PLANTS
STONES METAL GLASS RUBBER
CLOTH PLASTIC
96.0 dB
92.9 dB
R= 4 metres
R= 10 metres
9
0
.
3
d
B
C
a
l
c
u
l
a
t
e
d
9
0
.
3
d
B
C
a
l
c
u
l
a
t
e
d
9
0
.
3
d
B
C
a
l
c
u
l
a
t
e
d
98.0 dB
103.1 dB
96.2 dB
95.9 dB