Safety
General Cautions
• NEVER split anything other than wood logs
• DO NOT move or reposition the log splitter when the engine is running
• DO NOT alter or modify the log splitter in any way
• DO NOT operate the log splitter with another person - one person operation only
• Only one person must position the logs and operate the controls
• Keep all bystanders at least 10 feet away from the log splitter
• NEVER operate the log splitter if you are under the infl uence of drugs, alcohol or medication or when you are tired
• DO NOT allow an untrained person to operate the log splitter
• DO NOT allow anyone under the age of 18 to operate the log splitter
• DO NOT leave the machine unattended with the engine running
What You SHOULD Do
• Inspect hydraulic hoses every day – check for worn, frayed, kinked, and cracked areas
• Replace any damaged or worn hoses
• Use sheet of cardboard or piece of wood to check for hydraulic leaks while system is running
• Depressurize system to release residual hydraulic energy before starting any repairs
1. Shut off splitter engine
2. Move control valve handle back and forth, from one limit of travel to the other, at least four times
3. Hold valve for three seconds at each limit of travel
• Contact Timberwolf or an authorized Timberwolf dealer to replace worn components
7
TIMBERWOLF FIREWOOD PROCESSING EQUIPMENT
To Next Page
Loading...
