14
Features
Hydraulic Wedge Lift
Moves slip-on wedge up and down.
• 4 inches of vertical travel to adjust wedge height close to center of log
• One-lever hydraulic control
• Standard on TW-5, TW-6 log splitters
• Optional on TW-2 HD log splitter
TW-2HD, TW-5, TW-6 OPERATOR’S MANUAL
Optional Table Grate
• Tubular steel grate mounts behind wedge
• Enables convenient repositioning for second pass on large pieces
• Chips and debris fall through, providing cleaner fi nished product
• DO NOT transport the splitter with the Table Grate installed
Log Cradle
• Steadies log on beam
• Standard on all log splitters
• Heavy duty bolt-on cradle panels
• Two panels, one on each side of beam, when log lift not installed
• One panel opposite installed log lift
To Next Page
