Features
6-Way Slip-on Wedge
Splits log into six pieces with one thrust of the ram.
• For use on log splitters with a 5 inch or larger hydraulic cylinder
• Optional on TW-5 and TW-6 log splitters
• Not available on TW-2 HD log splitter
13
TIMBERWOLF FIREWOOD PROCESSING EQUIPMENT
• Splits log into quarters on each cycle
• Vertical wedge/mounting sleeve slides over the log splitter’s permanently installed single wedge
• Horizontal wedge height should be close to center of log
• Choose low or high horizontal wedge position by turning over the slip on 4-way wedge
• Low or high position aff ects range of heights available with wedge lift
• Low or high position is the 4-way wedge’s only adjustment on a TW-2HD log splitter without a wedge lift (see illustration on next page)
• 4-way wedge is standard on TW-5, and TW-6 log splitters
• 4-way wedge is optional on the TW-2 HD log splitter
4-Way Slip-on Wedge
To Next Page
Loading...
