Caution! Residual Hydraulic Energy!
Residual energy must be released from the pressurized hydraulic fl uid before any maintenance or repair
work is done on the log splitter. Hydraulic fl uid can remain highly pressurized even while the splitter’s
motor is off . Escaping pressurized hydraulic fl uid can penetrate skin and cause serious injury.
To release residual hydraulic energy:
1. Shut off engine
2. Move control valve back and forth, from one limit of travel to the other, at least four times
3. Hold valve for three seconds at each limit of travel
TIMBERWOLF FIREWOOD PROCESSING EQUIPMENT
To Next Page
Loading...
