Fluidity 2014-2015
- 4 -
Part replacement:
- Only use OEM parts to replace worn parts (bearings, derailleur hangers, etc.)
General use:
- We recommend that you entrust the assembly of your module to a specialist.
- When transporting your bicycle (particularly by air), make sure that it is protected against
abnormal distortion or impacts
- Regularly check your bicycle before use
- Keep your bicycle away from excessive heat
- In the event of a fall, have your bicycle checked by your retailer or TIME's customer service.
- If in doubt about a part of your module, contact TIME's customer service.
TIME accepts no responsibility for any incorrect assembly, carried out with unsuitable tools and
that does not comply with good practices.
To Next Page
Loading...