1. General Information
These instructions should be read carefully and retained for further
reference and maintenance.
Note: Timeguard reserve the right to alter these instructions, and the
SupplyMaster app, at any time. Up to date instructions will always be
available for download at www.timeguard.com.
2. Safety
• Before installation or maintenance, ensure the mains supply to the
time switch is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used
for the installation of this thermostat and install in accordance with
the current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this
thermostat is fitted does not exceed the rating of the circuit cable,
fuse or circuit breaker.
• To clean use a clean dry cloth only. Do not use liquid cleaners.
3. Technical Specifications
• Mains Supply: 220-240V AC 50Hz
• Fused: Supplied with BS1362 13A Fuse
• Rocker Switch: 2 Pole, providing isolation
• Switch Rating: 13A Resistive (3kW)
1000W Incandescent, Halogen lighting
500W Fluorescent, LED lighting
100W Compact Fluorescent lighting
• Contact Type: Normally Open, micro disconnection
To Next Page
Loading...
