TIPTEL 570 SD - Sample Programming for Timer

Timer
62
Use the two lower selection buttons
and the control buttons (left/right)
t
o find what needs to be changed in
t
he selected time.
The symbols have the following
meanings:
 = Answering mode
 = OGM
 = Message transfer
 = Call forwarding
Make the desired settings using the
control buttons (up or down).
A dash means that the previous status is
continued.
To delete a switching time press the
selection button next to the delete
symbol.
The empty entry field is displayed again.
2s
To delete the timer press the
selection button next to the delete
symbol for 2 seconds.
All switching times are deleted.
To stop entering additional
switching times press stop.
The settings are confirmed.
To stop the entry press stop several
t
imes.
The initial state is again displayed.
Sample programming for timer
You want your tiptel 570 SD to switch on OGM 1 on Mondays to Fridays at 17.00
and switch off at 08.00. When the office closes on Friday and over the weekend the
answering machine should use OGM 2 throughout. This requires 3 switching times.