he setting that you wish to change
until the desired setting is
displayed.
The display shows the current setting.
or
When entering digits press the
selection button next to the desired
line.
The entry location flashes.
Change the settings using the
control buttons (up/down).
The display counts up or down.
For settings with several digits
move the entry location to the
required location using the control
buttons (left/right).
The selected entry location flashes.
To end digit entry press the
selection button next to the desired
line again.
The entry location stops flashing.
To stop the entry press stop several
imes.
The initial state is again displayed.
Using the mailboxes
The corresponding symbols are displayed when you have set up mailboxes. In
answering mode the number of ICMs in the mailbox is indicated to the right of the
symbol. The mailboxes include playback and delete ICMs, monitoring/personal info
(memo) and OGM functions. These functions are described in detail in the previous
chapters. Because there is only one OGM for each mailbox it goes without saying
that it is not possible to select the OGM.
To Next Page
Loading...
