Keypad Instruction
You can check the following list which introduces the IP phone’s keypad in details:
Power Indication LED
It will show the power status, it will be on if the phone is powered, off if the phone is not
powered, and blink when someone calls in or there is a call on mute.
Hot Key
The screen will display labels for these keys, to identify their context-sensitive functions
and you can custom softkeys under different status.
Line Key
These buttons are used to active up to the three user accounts.
DSS Key
These keys are used for various functionalities such as call /Line appearance Button,
Speed dial, Intercom, Pickup, Hold, Transfer, etc. If not otherwise stated the adjacent
LED will light when the assigned functionality is turned on.
To Next Page
Loading...
