Titan Implement, LLC 3 3515 Flex-Wing Rotary Cutter
(423) 334-0012 February 2020
Pre-Delivery Checklist
The Dealer should inform the Purchaser of this product of the Warranty terms, provisions, and procedures that are
applicable. The Dealer and Purchaser should review the contents of the Operation and Parts Manual including
safety equipment, safe operation and maintenance, review the Safety Signs on the implement (and tractor if
necessary), and the Purchaser’s responsibility to train their operators in correct operating procedures.
• IMPLEMENTS: I have explained that Deectors, Guards, or Shields must be installed and maintained in good
repair.
• I have explained that it is not possible to guard against thrown objects when the cutter is lifted o the ground,
and that the operator is responsible for watching out for persons in the work area.
• DRIVELINES: I have made certain that all driveline, gearbox, and other shields are in good repair and
fastened securely in place to prevent injuries from entanglement or thrown objects.
PRE-DELIVERY SERVICE
CHECK AND ADJUST OR LUBRICATE AS REQUIRED
See Operation and Parts Manual for Details
Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete
LUBRICATION & HYDRAULICS
Gearbox Lubricant Level, Factory Filled
Make Sure Hydraulic Cylinders are Properly
Charged and Purged
Grease All Zerks
CUTTER
Make Sure that Slip Clutches Operate Properly
Make Sure the Gearbox Bolts are Properly Tightened
Make Sure that Blade Carrier Bolts are Properly
Tightened and Cotter Pins are in Place
Make Sure that Blades are Installed in Correct
Rotational Direction
Make Sure that All Hardware is Properly Tightened
Review Procedure to Adjust Cutting Height and Level
ATTACHMENTS & INSTALLATION
Make Sure the Chain Shielding is Attached
Make Sure All Bolts, Pins, and Nuts Are Properly
Installed and Tightened
I have thoroughly instructed the buyer on the above-described equipment. This review included the Operation and
Parts Manual content, equipment care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Dealer Rep. Signature_________________________________________
The above equipment and Operation and Parts Manual have been received by me, and I have been thoroughly
instructed as to care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Owner’s Signature_________________________________________
CUTTER TO TRACTOR CONNECTIONS
Make Sure Hitch Pin and Clevis are Properly
Installed
Complete All Pre-Operation Checks. Refer to “6.7
Pre-Operation Checklist” on page 37
SAFETY ITEMS
Make Sure Protective Shields are Properly Installed
Make Sure Safety Decals are Installed
Review Operation and Parts Manual (Supplied)
Make Sure Tractor PTO Shield is Installed
Make Sure S.M.V. Sign is Installed if Needed
Make Sure ADMA Driveline Safety Manual is
Supplied
Make Sure AEM Mower Safety Manual is Supplied
AEM Mower Safety Video has Been Shown to
Purchaser
Cut Here to Remove Page or Make Copies of This Page
To Next Page
Loading...
