Titan Implement, LLC 35 3515 Flex-Wing Rotary Cutter
(423) 334-0012 February 2020
6.4.2 Setting the Cutting Height
The rotary cutter should be operated at the highest
position, which will give the desired cutting results.
This will help prevent the blades from striking the
ground, increasing blade life, and reducing stress on
the rotary cutter and tractor.
1. Park the tractor and rotary cutter on level ground.
2. Using the tractor hydraulic cylinder control lever,
position the front of the rotary cutter with the side
skids 1” lower than the desired cut height. For
example, for a 3” cut, position the skids 2” from the
ground. Set the control lever stop at this position to
maintain this height when raising and lowering the
cutter.
To Next Page
Loading...
