Titan Epic 660ex User Manual

OWNERS MANUAL
FOR PROFESSIONAL
USE ONLY
313"" 233 REV 1i96F
DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
II
I
Epic 660ex.
100V Pump Only -702-212 100V Complete -702-213
120V
Pump Only -702-075 120V Complete ... 702-080
230V
Pump Only - 702-1 02 230V Complete - 702-1 04
This manual contains important warnings and instructions.
Please read and retain for reference.
Never operate this unit unless it is properly grounded.

Titan Epic 660ex Specifications

General

Maximum Operating Pressure	3000 PSI
Power Source	Electric
Voltage	120V
Type	Airless
Spray Tip Size	0.015 inch

Summary

General Repair and Service Notes

Maintenance Schedule

Service Record

High Pressure Spray Hazard Warning

Grounding Instructions

Details proper grounding procedures to prevent electrical shock and static discharge.

Fire and Explosion Hazards

Halogenated Solvents Information

Start-Up Procedure

Cleaning Procedure

Pressure Release Procedure

Flushing Specifications

Application Techniques

Airless Tip Selection

Troubleshooting Spray Patterns

Troubleshooting Airless Pump

Armature Replacement

Motor Housing Replacement

Component Replacement Procedures

Gear Replacement

Instructions for replacing gears within the pump section.

On/Off Switch Replacement

Steps for replacing the main power switch of the sprayer.

Power Supply Cord Replacement

Guide for safely replacing the electrical power cord.

Motor Starter Replacement

Motor Brush Replacement

Pressure Switch Replacement

Pressure Relief Prime Valve Service

Filter Service and Replacement

Pump Section Repair and Service

Titan Warranty Information