Titan XT290 - Short-Term Storage

English
18
Title
Short-Term Storage (up to 16 hours)
Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup and Long-
Term Storage steps.
Shutdown
1. Lock the spray gun off.
2. Turn the PRIME/SPRAY knob to PRIME. Switch the
pump OFF (O). Unplug the sprayer.
1. Remove the gun from the plastic bag. Stir the water into
the paint.
3. Turn the PRIME/SPRAY knob to SPRAY. Test the
sprayer on a practice piece and begin spraying.
3. Pour 1/2 cup water slowly on the top of the paint to
prevent the paint from drying. Wrap the spray gun
assembly in a damp cloth and place it in a plastic bag.
Seal the bag shut. Place the sprayer in a safe place out
of the sun for short-term storage.
2. Turn the PRIME/SPRAY knob to PRIME. Plug sprayer
in. Turn the switch to ON (I).
Startup
SPRAY
PRIME
SPRAY
PRIME
O
l
XT-05
LX60