TMT Automation CB236 - Page 9

9
F12
Overcurrent
Reaction Distance
when Open
F12-1
99.5% travel overcurrent reverse ,
the last 0.5% travel overcurrent
stop, reverse speed is the parameter
set by deceleration speed
F12-2
95% travel overcurrent reverse ,
the last 5% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F12-3
90% travel overcurrent reverse ,
the last 10% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F12-4
85% travel overcurrent reverse ,
the last 15% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed (Default
setting)
F12-5
80% travel overcurrent reverse ,
the last 20% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F12-6
75% travel overcurrent reverse ,
the last 25% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F13
Overcurrent
Reaction when
Close
F13-1
Reverse 2secs and stop(Default
setting)
F13-2
Reverse 3secs and stop
F13-3
Reverse 4secs and stop
F13-4
Reverse to the end
F14
Overcurrent
Reaction Distance
when Close
F14-1
99.5% travel overcurrent reverse ,
the last 0.5% travel overcurrent
stop, reverse speed is the parameter
set by deceleration speed
F14-2
95% travel overcurrent reverse ,
the last 5% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F14-3
90% travel overcurrent reverse , the
last 10% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F14-4
85% travel overcurrent reverse , the
last 15% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed(Default
setting)
F14-5
80% travel overcurrent reverse , the
last 20% travel overcurrent stop,
reverse speed is the parameter set
by deceleration speed
F14-6
75% travel overcurrent reverse , the
last 25% travel overcurrent stop,
reverse speed is the parameter set
ccxxby deceleration speed