General Description
The TOA KD-1 is a complete electronic music amplification system in a single
portable package, consisting of a mixer, spring reverberation unit, power amplifier,
and full range speaker system.
The mixer section provides four input channels, and an effects patching loop with
crossfade and level controls. Each input features 2-band active EQ, and level control.
Input channels 1 and 2 feature Effects on/off switches, while channels 3 and 4 feature
input sensitivity switches. Channel 1 also features an electronically balanced XLR mic
input connector with switchable 48 volt phantom power, for use with condenser-type
microphones.
The 50 watt RMS internal power amplifier features Auto Comp compression circuitry,
with an LED indicator, to ensure distortion-free performance and protection for the
internal 12-inch heavy duty speaker system.
The KD-1 is covered in a durable and attractive high tech gray vinyl fabric.
Features
System Features
Four input channels
50 watts power amplifier output
Auto Comp compression circuitry w/indicator
Power amplifier protection circuitry w/indicator
Built-in heavy-duty 12"(30cm) two-way loudspeaker
Built-in spring reverberation unit
Effects patching loop, returnable to system mixing buss with crossfade and level
controls
Each Input Channel
Two band EQ
Input channel 1 has electronically balanced XLR mic input connector with
switchable 48 volt phantom power
Input channel 1 and 2 has Effects ON/OFF switches
Input channel 3 and 4 has Input Level Selector switches
2
To Next Page
Loading...
