Tobii T60 - Assembling the Tobii T60;T120

Tobii T60 and T120 Eye Tracker
7
Assembling the desk stand
The eye tracker is shipped together with a standard Tobii desk stand. The mounting procedure
is as follows:
Slide the foot on to the stand.
Tighten the screws with a screwdriver
Connect the monitor bracket on to the stand bracket.
Check if the monitor-stand connection is in the right position.
Pull the lock lever on the monitor bracket to secure the connection.
To disassemble the eye tracker monitor from the desk stand, angle the monitor horizontally, unlock the
monitor bracket, and lift the monitor straight up.
1.
3. 4.
2.
1.
2.
3.
4.
5.
Assembling the Tobii
T60/T120
5.