TOELLNER TOE 9261 - General Data and Physical Dimensions of TOE 9261; TOE 9261 High-Current Connector Details

Section 4 – Technical Data
TOELLNER Electronic Instrumente GmbH
20
(Technical data, cont.)
General
Mains voltage
Wide-range input 90…264 V AC, 47-63 Hz, I
max
= 0.4 A,
rear appliance plug with fuse T1AL according to IEC 127-2/III,
DIN 41662
Power consumption, mains side
Max. 35 VA
Protection
Protection Class I according to DIN EN 61140
Degree of protection IP20 according to IEC 60529
Overvoltage category II according to IEC 60664-1
Pollution degree 2 according to IEC 60664-1
Operating temperature
0 - 40°C
Storage temperature
−20 - 70°C
Reference temperature
23°C ±1°C
Cooling
2-stage thermostatically controlled fan
Overall dimensions (W x H x D)
224 mm x 103 mm x 348 mm
Rack mount dimensions (W x H x D)
224 mm x 88 mm x 325 mm
19" system
Compatible with ½ 19", 2 HU
Weight
Approx. 4 kg
Housing
Aluminum/steel
4.2 General data
Ordering
options
0-50 A, 0-60 V ..... TOE 9261-50
0-100 A, 0-60 V ..... TOE 9261-100
Included
accessories
1 mains cable
2 terminal blocks for signal line switches
1 Instruction Manual
Optional
accessories
0.50 m connection cable with 1 safety socket, red ........................................... TOE 9260/22
0.50 m connection cable with 1 safety socket, blue .......................................... TOE 9260/23
1.20 m connection cable with 1 safety socket, red ........................................... TOE 9260/24
1.20 m connection cable with 1 safety socket, blue .......................................... TOE 9260/25
19" adapter set 2 HU (asymmetrical) for 1x TOE 9261 .................................... TOE 9521
19" adapter set 2 HU (parallel connector) for 2 Toellner Instruments ½ 19" .... TOE 9522
4.3 Specification of the high-current connectors
The built-in high-current connectors of the TOE 9261 are the following components:
TOE 9261-50......... Safety flush-mounting plug, type ID/S6AR-N-B4S, manufacturer Multi-
Contact
TOE 9261-100 ...... Safety flush-mounting plug, type ID/S6AR-N-S, manufacturer Multi-
Contact
Suitable counter piece for crimping assembly on cables is the following:
TOE 9261-50 and TOE 9261-100 ....... Safety socket, type KBT6AR-N/16-S, manufacturer
Multi-Contact.
This counter piece can only be attached to a cable by
crimping assembly using special tooling, soldering is
impossible.