ENGINE OPERATION 37
7
cover and the top cowl after the engine
has been started.
Do not pull starter rope if any bystander
is behind. The action can injure the
bystander.
Attach engine stop switch lanyard to
clothing or any part of body like arm
before starting engine.
1. Remove the top cowl.
2. Remove starter lock cable from recoil
starter by pulling the starter lock cable.
3. Remove the bolts (5pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel and
wind the rope around the flywheel sev-
eral turns clockwise.
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
To Next Page
Loading...
Need help?
General
