TOHATSU MFS 4C User Manual

ENGINE OPERATION34
7
3. Set the throttle grip to START posi-
tion.
1. Throttle grip
4. Pull the choke knob fully.
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to “RE-START”
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. repeat if necessary until
started.
1. Slowly
2. Quickly
ENOW00064-0
Engine may be hot immediately after operat-
ing and could cause burns if touched. Allow
engine to cool down before attempting to
carry the outboard.
6. After engine starting, return the
choke knob while check the engine
speeds. if the engine speeds unstable,
pull the choke knob to operated.
7. Check the cooling water from cooling
water check port.
1. Cooling water check port
ENOM00042-A
Emergency starting
ENOW00099-A
When the emergency starter rope is used for
starting engine;
z Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
z Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
z To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
z Do not pull starter rope if any bystander is
behind. The action can injure the
bystander.
1
ENOF01107-0
2
1
ENOF00432-0
CAUTION
WARNING
1
ENOF00437-1

TOHATSU MFS 4C Specifications

General

Brand	TOHATSU
Model	MFS 4C
Category	Outboard Motor
Language	English