TOHATSU MFS 4C User Manual

ENGINE OPERATION 37
7
ENOW00861-0
Do not shift at high boat speed, or control
may be lost, falling down or causing passen-
ger(s) to be thrown overboard. Leading to
serious personal injury.
ENOW00862-0
Gear and clutch damage may occur if shifting
at high engine speed.
Engine must be in the slow idle position
before shifting is attempted.
ENOW00863-0
Idle speed may be higher during warming up
of engine. If shifted to Forward or Reverse
during warming up, it may be difficult to shift
back to neutral. In such case, stop engine,
shift to neutral, and restart engine to warm
up.
ENON00014-0
Note
Frequent shifting to forward or reverse can
accelerate wear or degradation of parts. In
such case, replace gear oil earlier than the
period specified.
ENOW00864-0
Do not increase engine speed unnecessarily
when the shift is in neutral and reverse, or
engine damage may occur.
ENOM00890-A
Tiller handle type
ENOW00865-A
Do not force to shift when the throttle grip is
not in the fully closed position, otherwise,
steering system and/or shifting mechanism
may be damaged.
1. Shift lever
Forward
1. Turn the throttle grip to reduce
engine speed.
2. When the engine reaches trolling (or
idling) speed, quickly pull the shift
lever to the Forward position.
Reverse
1. Turn the throttle grip to reduce
engine speed.
2. When the engine reaches trolling (or
idling) speed, quickly pull the shift
lever to the Reverse position.
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
(R)
N
(F)
1
ENOF00438-0

TOHATSU MFS 4C Specifications

General

Brand	TOHATSU
Model	MFS 4C
Category	Outboard Motor
Language	English