3-8
• The right lens must be measured first and then the left
lens.
b. Move the lens gently right and left, back and forth to align the
cursor (+) on the crosshair.
MODE
CYL
STEP
R
SPH CYL AXIS ADD
AUTO
c. When the center of the near portion is found, a beep will sound,
following which the measurement display will change for the
masurement of the distance portion of the lens.
MODE
CYL
STEP
R
SPH CYL AXIS ADD
AUTO
• If the add is low, the center of the near zone may not be
detected. Align the geometrical center of the lens on the
crossbar and press the HOLD button.
3.2 MEASURING METHODS
To Next Page
Loading...
Need help?
General
