3-25
3.4 SETUP
d. ABBE NUMBER
The Abbe number in the normal mode is 60 (fixed value).
The Abbe number in the HI mode may be changed in increments
of 5 ranging from 30 to 60 (Default setting: 35).
AUTO
HI
MODE
CYL
STEP
R
PRISM PRISM AXIS
SPH CYL AXIS ADD
e. AUTO HOLD
ON: AUTO HOLD mode will be in effect
when the unit is turned on.
OFF: MANUAL mode will be in effect when
the unit is turned on.
The "AUTO" indicator flashes to prompt the next setting. As
previously, press the READING button to select the setting for
each parameter and press the MODE button to proceed to the next
parameter.
AUTO
HI
MODE
CYL
STEP
R
PRISM
PRISM AXIS
SPH CYL AXIS ADD