36
Using Bluetooth® Hi-Fi speakers
Your Blue&Me-TomTom can play sound through Bluetooth® Hi-Fi speakers,
such as a Bluetooth® Hi-Fi headset, or a car stereo which uses Bluetooth®.
Note: Bluetooth needs to be enabled before you can use a Bluetooth Hi-Fi
speaker. Tap Change preferences, followed by Bluetooth preferences to ena-
ble Bluetooth.
To play sound over Bluetooth® Hi-Fi speakers, do the following:
1. Tap Speaker preferences in the Preferences menu.
2. To play spoken instructions or music through a Bluetooth device, select
Bluetooth Hi-Fi device.
3. Tap Done.
4. Your Blue&Me-TomTom asks you to confirm that you want to use an exter-
nal Bluetooth® Hi-Fi speaker. Tap YES.
Your Blue&Me-TomTom starts searching for Bluetooth® Hi-Fi devices.
5. Select your Bluetooth® Hi-Fi device from the list of devices found by your
Blue&Me-TomTom.
Your Blue&Me-TomTom tries to establish a Bluetooth® connection with
your device.
Your device may ask you to enter a password on your Blue&Me-TomTom
before a Bluetooth® connection can be established. See the documentation
for your Bluetooth® Hi-Fi device for more information.
Once connected, sound is be played through the external Bluetooth® Hi-Fi
device.
If your Blue&Me-TomTom cannot establish a Bluetooth® connection then all
sound is played through the internal speaker or through the audio cable if it is
connected.
Speaker
preferences
Tap this button to change the speaker settings.
To Next Page
Loading...
