Voice command and control9.
21
Voice command and control
There are two types of voice command and control.
The first type is provided by Blue&Me and you can use it to control Blue&Me
features. You do this using a button on your steering wheel.
The second type is provided by your navigation device and you can use it to
plan routes and control other features of your navigation device. You do this
by initially tapping the screen on the navigation device.
Blue&Me voice command and control
Press this button on your steering wheel to start using command and
control provided by Blue&Me.
Then give one of the following voice commands:
• Say "SatNav" to start using buttons on the steering wheel to control your
navigation device.
• Say "Car Menu" to open the Car menu. Then say one of these voice com-
mands: "Telephone", "Trip Computer" and "eco:Drive info".
The menu opens for your chosen command. Blue&Me lists the commands
available for that menu.
To return to the Driving View at any time, press Done on your navigation
device.
Note: For a list of all Blue&Me voice commands see the FAQ on tomtom.com/
support. For additional information about Blue&Me voice command and con-
trol, please see the Blue&Me manual that was delivered with your car.
Navigation device voice command and control
Instead of tapping the screen to control your Blue&Me-TomTom navigation
device, you can give instructions to your device using your voice. For exam-
ple, to increase the volume, you can say, "Increase volume."
Important: To use command and control on your navigation device, you must
have a computer voice installed on your Blue&Me-TomTom device. You can
install computer voices using TomTom HOME.
To view the list of available commands, tap Command and control in the Pref-
erences menu and then tap What can I say?
To Next Page
Loading...
