Pairing and connection4.
7
Pairing and connection
Your Blue&Me-TomTom navigation device and Blue&Me in your car commu-
nicate with each other using a Bluetooth connection.
To pair your navigation device with Blue&Me, do the following:
1. Turn your car key to the MAR position.
2. Press the MAIN button on your steering wheel to open the main menu of
Blue&Me in the cluster display of your car.
3. Use the arrow buttons on the steering wheel to navigate to the settings
menu.
4. Select Settings and then Pairing.
A 4-digit PIN code appears on the cluster display. You use this PIN in a later
step.
5. On your navigation device, tap Change preferences then
Blue&Me.
6. Tap Find Blue&Me.
7. Tap Yes when your navigation device asks if you want to establish a con-
nection.
8. Tap Yes when asked if you want to start searching for Blue&Me now.
9. Enter the Blue&Me PIN on your navigation device. This is the PIN shown in
the cluster display of your car earlier.
A message confirming that the connection is successful appears both on
the navigation device and in the cluster display. Each time the Blue&Me-
TomTom device is connected or disconnected from Blue&Me, you see a
confirmation message.
When your navigation device and your car have been paired, the Car Menu
button appears in the Main Menu of the navigation device.
To Next Page
Loading...
