TomTom RIDER 2nd Edition User Manual

17
•
•
•
•
•
•
Chapter 5
Making your first trip
Making your first trip
Planning a route with TomTom RIDER is very simple. To plan your first route,
follow the steps below.
1. Tap the screen to bring up the main menu.
2. Tap Navigate to...
For your first journey, we will navigate to an address.
3. Tap Address.
When you enter an address, you can choose from four options:
• City center - tap this button to set your destination as the center of a city
or town.
• Street and house number - tap this button to set an exact address as your
destination.
• Postcode - tap this button to enter a postcode as your destination (fully
supported only in UK and the Netherlands).
Note: You should always plan your journeys before you start driving. It is
dangerous to plan routes when you are already moving.
Note: You can enter a zip code for any country. In the UK and the
Netherlands, zip codes are detailed enough to identify a house on their own.
In other countries you can enter a zip code to identify a town or area. You
will then have to enter a street and address.

TomTom RIDER 2nd Edition Specifications

General

Marine (chartplotters, sounders)	No
Map view options	2D/3D
Form factor	Fixed
Channels quantity	20 channels
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Internal memory	32 MB
Power requirements	12V
Processor frequency	380 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	96.2 mm
Width	113.2 mm
Height	52.9 mm
Weight	310 g