TomTom RIDER 2nd Edition User Manual

61
•
•
•
•
•
•
Chapter 15
TomTom Traffic
TomTom Traffic
TomTom Traffic
TomTom Traffic is a TomTom PLUS service that sends up-to-date traffic
information to your RIDER. To use TomTom Traffic you must have a mobile
phone with Bluetooth and a wireless data connection, for example, GPRS,
EDGE, UMTS, CDMA.
TomTom Traffic takes the most up-to-date information from the best local
sources. Take advantage of the free trial to try TomTom Traffic. For more
information, see the TomTom PLUS leaflet.
Setting up TomTom Traffic
To receive TomTom Traffic, first establish a connection between your mobile
phone and your TomTom RIDER. See Connecting to Your Phone on page 45.
Then do the following:
1. Tap TomTom Traffic in the Main Menu.
2. Tap Enable Traffic.
Using Traffic
When TomTom Traffic is enabled, or a TMC antenna is connected to the
windscreen mount, the Traffic bar is shown on the right-hand side of the
Driving View, as shown below:
Note: TomTom Traffic is not available in all countries or areas. Visit
www.tomtom.com/plus to check availability in your country.

TomTom RIDER 2nd Edition Specifications

General

Marine (chartplotters, sounders)	No
Map view options	2D/3D
Form factor	Fixed
Channels quantity	20 channels
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Internal memory	32 MB
Power requirements	12V
Processor frequency	380 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	96.2 mm
Width	113.2 mm
Height	52.9 mm
Weight	310 g