TomTom RIDER 2nd Edition User Manual

45
•
•
•
•
•
•
Chapter 13
Hands-free calling
Hands-free calling
Connecting to Your Phone
First you must establish a connection between your cell phone and your
TomTom RIDER. You only have to do this once. Your TomTom RIDER
remembers your phone.
Tap cell phone in the Main Menu, then follow the instructions on the screen.
Setting up TomTom PLUS
After you have established a connection with your phone, you can set up a
wireless data connection for TomTom PLUS services.
For information about TomTom PLUS, see TomTom PLUS on page 63.
Your Phone Book
You can copy your phonebook from your mobile phone to your
TomTom RIDER so that you can make calls with just a few taps on the screen.
Note: not all phones are supported or compatible with all features. For more
information, visit www.tomtom.com/phones
Tips
• Make sure that you switch on Bluetooth on your phone.
• Make sure that your phone is set to "discoverable" or "visible to all".
• You may have to enter the password ‘0000’ on your phone in order to
connect to your TomTom RIDER.
• Make your TomTom RIDER a trusted device on your phone. Otherwise
you will have to enter ‘0000’ every time.
See your phone’s user guide for information about Bluetooth settings.

TomTom RIDER 2nd Edition Specifications

General

Marine (chartplotters, sounders)	No
Map view options	2D/3D
Form factor	Fixed
Channels quantity	20 channels
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Internal memory	32 MB
Power requirements	12V
Processor frequency	380 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	96.2 mm
Width	113.2 mm
Height	52.9 mm
Weight	310 g