52
•
•
•
•
•
•
Change language
Tap this button to change the language used for all the buttons and messages
you see on your RIDER.
You can choose from a wide range of languages. When you change the
language, you are also given the opportunity to change the voice.
Warn when near POI
Tap this button to be alerted when you are near a Point of Interest (POI).
For example, your RIDER can tell you when there is a gas station nearby.
To find out about POIs and about setting warnings for POIs, see Points of
Interest on page 39.
Set clock
Tap this button to set the time and to change the way the time is displayed.
The easiest way to set the time is by tapping the Sync button. Your RIDER will
then take the time from the GPS information it receives.
For more information about GPS, see How Does Navigation Work? on
page 67.
Switch map
Tap this button to change the map you are using.
When do I need to switch map?
You have to tell your RIDER which map you want to use. If there is more than
one map on the hard disk or memory card in your RIDER, you can switch to
another map.
Keyboard preferences
Tap this button to select the size of the keys on the keyboard and the keyboard
layout. You can select from two sizes:
• Large keyboard
• Small keyboard
Three keyboard layouts are available:
• ABCD keyboard
• QWERTY keyboard
Change
language
Warn when
near POI
Set clock
Note: After using Sync to set the time, you may have to adjust the hours
depending on your time zone. Your RIDER works out your time zone and
always keeps the time correct using the GPS information.
You can only use Sync if you have GPS reception, so you cannot set the clock
in this way when you are indoors.
Switch map
Note: When you switch to another map, you may need to activate that map.
For more information about activating maps, see Using the Map on page 33.
Keyboard
preferences
To Next Page
Loading...
Need help?
General
Weight and Dimensions
