TomTom RIDER 2nd Edition User Manual

6
•
•
•
•
•
•
You can now set the password for your RIDER. You can also set your name
and address, which will then be shown when your RIDER starts up.
Take care of your TomTom RIDER
It is important to take care of your RIDER and to clean it correctly.
• Use a soft cloth to wipe the screen of your RIDER; do not use any liquid
cleaners.
• If your RIDER gets wet, dry it with a soft cloth.
• Do not open the casing of your RIDER under any circumstances. Doing so
may be dangerous and will invalidate your warranty.
• Do not use the memory card (SD card) with any device other than a
TomTom device. Other devices may damage the memory card.
• Do not expose your RIDER to high or low temperatures, which can cause
permanent damage. For example, don’t leave it in the car on hot summer
days or during cold winter nights.

TomTom RIDER 2nd Edition Specifications

General

Marine (chartplotters, sounders)	No
Map view options	2D/3D
Form factor	Fixed
Channels quantity	20 channels
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Internal memory	32 MB
Power requirements	12V
Processor frequency	380 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	96.2 mm
Width	113.2 mm
Height	52.9 mm
Weight	310 g