6 Tone Commander 8810 User Guide
Operation
Placing a Call
Selecting a Call Appearance
If your telephone is idle and the Call Preference option (page 47) is set
to Idle or Ringing, an idle call appearance will be automatically selected
when you go off-hook, or the speakerphone will be activated when you
press a Speed Dial, DSS, REDIAL, or dial pad key while on-hook.
Automatic Call Appearance Selection
Handset mode: Lift the handset, press the SPKR key, or press
a dial pad key to automatically select an idle call appearance.
Headset mode: Press the
HEADSET key, or press a dial pad
key to select an idle call appearance.
See page 48 for handset/headset mode selection.
Manual Call Appearance Selection
Press an idle (unlit) call appearance key.
Dialing
Dial the number with the dial pad.
The dialed number will be displayed briefly, and then the
network will confirm the dialed digits in the display.
The call duration timer begins when you are connected.
Hot Key Dialing
Begin dialing by pressing a dial pad key while on-hook.
An idle call appearance, if available, will be selected
automatically.
To Next Page
Loading...
