34 Tone Commander 8810 User Guide
VOICE MAIL ACCESS
95551432
Voice Mail Keys
Voice Mail Access Key
Note: The VMAIL key must be programmed to dial the voice mail
access number in order for this feature to work properly.
“Smart” pauses and PIN codes can be included in the
number.
From the Installation Options menu, select KEYS.
(
SETUP → INSTL → KEYS)
Press the
VMAIL key.
The Message Waiting indicator will flash.
Select NUMBER to view or change the
VMAIL key speed dial
number. This is the number that is dialed to access your voice
mail system.
The currently programmed dial string, if any, will be shown in
the display.
Enter digits (24 maximum) with the dial pad.
“Smart” pauses are entered with the PAUSE softkey, and are
shown in the display as a P character. The first pause in a dial
string will wait until the call is answered; additional pauses
delay dialing for one second. Enter multiple pauses to
increase the delay time.
If you need to make corrections while entering numbers,
select
◄
BKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over.
When all digits have been entered, press the
OK key.
To Next Page
Loading...
