48 Tone Commander 8810 User Guide
VOICE MODE=HAND/HEADSET
HAND HEAD VOLUME
VOLUME:RCV=04 XMT=05
RCV+ RCV- XMT+ XMT-
Handset/Headset Configuration
Handset/Headset Mode
Select handset or headset operation with this option. When in headset
mode, all dialing that automatically selects a line will connect to the
headset. In handset mode, the
HEADSET key is not used.
From the User Options menu, select VOICE.
(
SETUP → USER
→ ►
→ VOICE)
Select HAND or HEAD to select handset or headset mode.
Press the
OK key to return to the User Options menu or press
the
SETUP key to exit Setup Mode.
Preset Volume Levels
Preset volume levels for handset and headset operation may be set to
match a particular headset’s transmission characteristics, or provide
higher preset volume levels for hearing impaired users. Preset
speakerphone volume level is set when the volume is changed during a
call, and is not changed between calls.
The telephone is reset to preset volume levels whenever a call is
originated or answered. Receiver volume levels set with the Volume
keys are used only for the duration of a call.
This option sets preset volume levels for the current mode, handset or
headset. Separate preset receive levels are stored for handset and
headset modes. Transmit volume level is not adjustable for the
handset.
Select VOICE.
Select VOLUME.
The display will show the current preset volume settings.
To Next Page
Loading...
